The S100 internal grinding entry-level machine was presented at the BI-MU Exhibition for Machine Tools in Milan by STUDER.
Like all STUDER cylindrical grinding machines, the S100 also has a machine bed made of Granitan®. It’s outstanding dampening, and thermal characteristics ensure consistently good grinding results and the renowned STUDER precision. During development, special attention was given to a simple and efficient design of the components, making operation and maintenance easier for the opera-tor. However, the equipment of the S100 also makes it suitable for grinding a universal spectrum of parts comprising of geometrically defined basic forms and contours, which can be generated with interpolating axes.
Flexible equipment ensures a diversity of parts
The machine can be equipped with up to two internal grinding spindles or one internal and one external spindle. In addition to a fixed wheelhead, it can be equipped with manual of a 2.5-degree Hirth and, in its optimum configuration, with an automatic wheelhead with 1-degree Hirth. A syn-chronous motor drives the grease-lubricated internal and external belt spindles. The machine is operated by the Fanuc 0i-TF PLUS controller, together with the proven STUDER operating system.
A further advantage of the S100 is the automation option. On request, it can be equipped with a loading interface and an automatic sliding door, enabling automatic operation and the production of large series.
Typical workpieces for production on the S100 include collets for toolmaking, bearing rings, ball bearings and cylinders, as well as hydraulic control valves in small series. External and internal machining of flange parts or grinding of threads or non-circular forms is also possible.
The competent and reliable STUDER Customer Care is naturally also on hand to provide advice and technical support for the S100. A total of more than 200 specialists worldwide ensure that the ma-chine operates reliably and efficiently throughout its entire lifetime and fully satisfies all require-ments.
Technical data of the S100 at a glance
Maximum workpiece length: 550 mm (21.65 inches)
Maximum swing diameter: 425 mm (16.73 inches)
Maximum internal grinding diameter: 180 mm (7.08 inches)
Maximum diameter of internal grinding wheel: 63 mm (2.48 inches)
Internal grinding spindle speeds: 20.000/40.000/60.000 rpm
Maximum diameter of external grinding wheel: 400 x 40 x 127 mm (15.74 x 1.57 x 5.00 inch-es) F1N
Workhead: Chuck workhead ISO50/110 or chuck workhead MT4/70
Machine dimensions W × D × H : approx. 3090 × 2090 × 1990 mm (121.65 × 82.28 × 78.34 inches)
Machine weight: approx. 4500 kg (9,920 lbs)