All the latest news from the industry weekly compiled by the editorial team for you free of charge.
This eMail is already registered.
An unexpected error occured.
Please accept our Terms of Use.
Registration successful.

Two heads are better than one when it comes to creativity. Similarly, four lasers are better than one when it comes to metal Additive Manufacturing

ADDITIVE MANUFACTURING Exploring Metal Additive Manufacturing

Dec 14, 2018

As the metal Additive Manufacturing indusrty is advancing, the use of one laser decreases productivity. Also, machine platform size is very big. The article explains how the use of four lasers can decrease the machine platform size and significantly improve productivity.

Two heads are better than one when it comes to creativity. Similarly, four lasers are better than one when it comes to metal Additive Manufacturing. On this line of thinking, the new RenAM 500Q four-laser system is expected to significantly improve productivity in the most commonly used machine platform size. By speeding up the process by up to four times, Renishaw expects the RenAM 500Q to broaden the market appeal of metal Additive Manufacturing. This will advance the technology into applications that are presently uneconomic, and potentially into new industries that are yet to embrace AM in production applications.

Innovative design

The key driver for the RenAM 500Q is a new, innovative optical system. The system is a critical component within the AM system and was designed through a collaboration between Renishaw’s dedicated control software and mechanical engineering departments.

The ytterbium fiber laser beams enter the optical system and are guided by four pairs of mirrors driven by precision galvanometers (galvos), which rotate to steer the laser beams across the build plate. The optical system also focuses the lasers dynamically, continuously adjusting their focal lengths to maintain a consistent spot size as the beam angles change across the flat working area. The optical system design is produced with a hybrid manufacturing technique.

Productivity unshackled

The new four-laser system improves productivity up to four times, without increasing platform size. Larger systems face additional challenges, including increased material inventory, mechanical handling of heavier substrates, shielding gas efficiency over a larger working area and the inevitable higher capital cost and factory footprint of larger systems.

The RenAM 500Q builds on the system architecture of Renishaw’s RenAM 500M single-laser system for series production, but with some significant differences. The most obvious is four lasers but all subsystems must be re-engineered in order to cope with the additional throughput. Of high importance is the ability to deal with the additional process emissions generated by four lasers. Resolving this with a higher throughput of gas and greater gas velocity, places an increased burden on other subsystems, such as, filtration, used to capture the process emissions. Intercooler can be added into the gas stream to maintain consistent processing temperatures and a pre-filter cyclone. Other areas that have been enhanced include improved gas flow consistency across the processing area, significantly reducing cleaning between builds. With four lasers that work over the entire build area, it is also vital to maintain a precise relationship between the optical system and the powder bed. A number of engineering advances contribute to achieving this, including precision kinematic mountings used to locate the re-coater, improving set-up time and repeatability.

Small footprint, big possibilities

Using four lasers efficiently requires more up-front programming and process engineering work. The easiest place to start is to assign each laser to an individual or group of independent parts. The lasers can then work in parallel. Initial findings suggest that some care is needed when processing adjacent parts simultaneously, where the emissions from one might affect the other. Results show some marginal differences in surface finish, but overall, this is the simplest processing scenario to manage and the recommended start point for most users.

Beyond this, the application plays a more significant role in the choices around multi-laser processing. One example is the Renishaw RenAM 500Q galvo mounting block, which is additively manufactured in 19 hours using four lasers. It is an ideal AM part and an application where the operational demands are focussed on thermal stability, leak proofing and geometrical repeatability. It is not under significant structural load and so, component testing can be confined to verifying functional design requirements.

For more challenging structural parts, particularly those in safety critical applications, such as, aerospace, healthcare and motorsport, most users will want a detailed understanding of the effects of multi-laser interaction, which will require more testing and evaluation. Each user will have their own perspective on how to approach multi-laser technology; whether using it to enhance productivity for an already mature AM application, or to unlock new markets and applications that significant productivity gains allow.

Additive Manufacturing is now a viable series production technology. The technology is moving towards applications where it is not just the technical benefits of AM that are attractive, but also the production economics for high quality components. What’s more, the RenAM 500Q system offers up to four times greater productivity but at a modest increase in initial capital investment – this translates into a reduction in piece part component cost, which will, both, broaden the appeal of metal Additive Manufacturing and allow existing users to achieve more.

Image Gallery

  • The galvanometer block additively manufactured using RenAM 500Q over a period of 19 hours

  • The galvanometer block additively manufactured using RenAM 500Q over a period of 19 hours

  • The galvanometer block additively manufactured using RenAM 500Q over a period of 19 hours

Companies related to this article
Related articles